Ferrari 250 GT Lusso 6 carburateurs

Ferrari 250 GT Lusso 6 carburateurs

2 100 000 €*

About

This Ferrari 250 GT Lusso with 6 carburettors is a sports tourism automobile built by the manufacturer Ferrari rare in this configuration. Also known as GTL or GT / L, it is not to be found with the Berlinetta Lusso, which was a special version of the 250 GT Berlinetta SWB, 250 GT Lusso, which is not intended for Grand Touring, Is a more luxurious and spacious version of the 250 GT, 250 GT Lusso. Considered one of the most elegant models of Ferrari, it is designed by the Turin coachbuilder Pininfarina and bodied by Scaglietti. Although the cabin is more spacious than the 250 GT, the GT Lusso remains a two-seater GT coupe, unlike the 250 GTE, 2+2 coupe. Produced in 1963-64 over just 18 months, the Ferrari 250 GT Lusso represents the latest model of the Ferrari 250 GT generation. The brand takes advantage of the 1962 Paris Motor Show to present its prototype Ferrari 250 GT Lusso, which fills the gap between the 250 GT SWB and the 250 GTE 2+2 coupe. This model is launched in order to meet the requirements of the 1960s, as sports enthusiasts persons become more in search of civilized, comfortable and spacious models, more than radically sporting, the finishes of the Ferrari GTL being of high level, which is felt in weight, between 1,020 and 1,310 kg depending on the finish. Taking on some of the aesthetic and aerodynamic features of the 250 GT and 250 GTO, the Ferrari 250 GT Lusso, which will seduce various personalities of the time, including Steve McQueen, is considered one of the most beautiful Ferrari ever produced.

The body is made of steel (except doors, trunk lid and engine cowl, designed in aluminum), the back is sculpted of a small fin, first of the Ferrari line of tourism to integrate this aerodynamic appendage which ends with a steep Kammback style back. The short rear is characteristic of the Ferrari coupe with a gently sloping bezel. Glass surfaces, such as the rear window and triangular custodes, are important and the thin studs provide excellent visibility. The Ferrari 250 GT Lusso is equipped with four round headlights in the front, two of which are integrated into the wings, except for a few rare versions, including the Speciale Berlinetta Coupe designed by Battista Pininfarina, which feature only two headlights streamlined in spirit of the Ferrari 250 GT California Spyder. Numerous body features can be seen on the Ferrari 250 GT Lusso, such as the rectangular ventilation grille on the hood, the highly curved wings, the predominantly decorative front chrome bumpers placed vertically under each position light. Thanks to the engine's advance of a few centimeters on the front axle, the Ferrari 250 GT Lusso has a spacious cockpit. This modification was rare at Ferrari, the sports car having to concentrate at the time the weight at the center of the automobile.

The integration of only two seats instead of four on the 250 GTE made it possible to have a place to receive the luggage behind the comfortable bucket seats, this space being covered with quilted leather and fastening straps for these suitcases. The 250 GT Lusso was civilized and had non-adjustable seat backrests, but the depth of the pedals was adjustable to five centimeters, as in the race versions. Covered with soft leather, the dashboard design is unusual with a tachometer with a red zone starting at 8,000 rpm, a speedometer in the center, slightly oriented towards the driver, and five additional gauges on the driver's side behind Nardi three-spoke steering wheel in wood and aluminum, arranged almost vertically. Unlike the 250 GTE 2+2 with a wheelbase of 260 cm, the Ferrari 250 Lusso GT has a short wheelbase of 20 cm less, identical to that of the 250 GT berlinette. The chassis has a formidable efficiency and adopts the tubular structure of the 250 GTO with reduced tube cross-section and the suspensions are modern, with superimposed triangles and coil springs at the front.

Powered by the well-known V12 Colombo Ferrari engine with a three-liter capacity, the Ferrari 250 GT Lusso develops 240 hp for a top speed of 240 km/h, making it the fastest passenger car in the world at this period. But the Lusso presented for sale is presented in an even more desirable configuration with 6 carburettors developing a power of 280 horsepower. The valves and the crankshaft were derived from the Ferrari 250 GT SWB engine, while the pistons and cylinder block came from the 250 GTE. This engine is just as civilized as the passenger compartment, with only one overhead camshaft per cylinder bank, driven by chain, two valves per cylinder and three carburettors, as opposed to six usually on more sporty versions . Although not intended for competition, the 250 GT Lusso will make some appearances in several sporting events in 1964 and 1965, such as the Targa Florio and the Tour de France. The latest addition to the line-up of the Ferrari 250, started in 1952 with the 250 S, the end of production of the 250 GT Lusso announces the start of a new generation of Ferrari, the 275 and 330 series, always more luxurious and refined. The Ferrari 250 GT Lusso also marked the culmination of Enzo Ferrari's commercial strategy, which wanted the carmaker to sell race cars, road race cars, road cars which can do competition and classical efficient road cars.

The Lusso Ferrari 250 GT for sale on Furnish Your Castle is offered in a beautiful dark champagne color revealing the luxury and subtlety of its beige leather interior with the really beautiful Ferrari luggage, which sits on the parcel shelf of this exceptional great sporting tourism from the 1960s. Its 3-liter V12 engine configured in better sporting version than its launch, features 6 Weber carburettors. Its exceptional power output of 280 hp allows it to have a maximum speed of more than 250 km/h. With matching numbers and Ferrari Classiche, this collection car is presented in a state close to the perfection following a sublime and complet restoration of all its elements, from chassis as evidenced by the complete photographic record that we can communicate to you.

Engine

  • Number of cylinders:V12 Colombo 60 ° in front longitudinal position with 24 valves, two single overhead camshafts, powered by 6 double barrel Weber 36DCS carburetors
  • Displacement:2953 cm³
  • Bore x stroke:73 x 58,8 mm
  • Fiscal power:17 HP
  • Maximum horsepower:280
  • Maximum torque:255 Nm (5 500 rotations/min)

Other technical elements

  • Transmission:By the rigid rear axle provided by a drive shaft. Single-disc clutch and synchro 4-speed gearbox + reverse gear
  • Direction:Rack and pinion
  • Suspension:Double wishbones and coil springs at the front. Live axle, leaf springs, semi-elliptical concentric coil springs and telescopic shock absorbers on the rear
  • Brakes:Hydraulically operated disc
  • Wheels and tyres:185/80/15 tyres
  • Body:Berlinetta coupe with two seats and tubular steel chassis
  • Ref.:2611

Dimensions, production and performance

  • Manufacturer:FERRARI
  • Length:441 cm
  • Width:175 cm
  • Height:129 cm
  • Wheelbase:240 cm
  • Front track:139 cm
  • Rear track:138 cm
  • Number of copies:351
  • Years of production:1963-1964
  • Maximum speed:250 km/h
  • 0 to 100 km/h:7 s

Color and finishing

  • Body color:Dark champagne
  • Interior finishing:Beige leather

Conservation status

Concours condition
Beautiful restoration from the chassis

See more products
*Non contractual pictures. The complete file of this automobile with historical, restoration status, detailed photos, expertise and vehicle visit will be communicated after proof of bank funds. Contact us for more information.